Details
Digital to analog conversion type
|
Proprietary Optologic D/A conversion system
Pure R2R ladder - FPGA (Field Programmable Gate Arrays) based without digital filter |
Supported Native Sample Rates
|
AQlink / I2S serial bus - USB PC Audio : 44.1kHz to 384kHz PCM up to 24 bits
DSD64, DSD128 Supports DSD via DoP on all inputs |
DAC architecture
|
Multibit sign magnitude R2R ladder (upgradable)
|
Asynchronous USB (High Speed)
|
USB Audio Class 2 with Type B connector
|
Digital Receiver
|
PLL (phase locked loop) technology 128 or 256 FS internally selectable
|
AQlink (I2S bus)
|
CMOS level
|
Oversampling factor
|
1x
|
Digital inputs
|
- RJ45 AQlink (I2S serial bus) - PCM 24 bit / 384kHz – DSD64, DSD128 via DoP
- BNC coax (S/PDIF) 75 ohm - PCM 24 bit / 192kHz – DSD64 via DoP - RCA coax (S/PDIF) 75 ohm - PCM 24 bit / 192kHz – DSD64 via DoP - AES/EBU balanced 110 ohm - PCM 24 bit / 192kHz – DSD64 via DoP - USB port - PCM 24 bit / 384kHz – DSD64, DSD128 via DoP - AT&T (ST Fiber) - PCM 24 bit / 192kHz – DSD64 via DoP (optional) |
Analogue Outputs
|
UNBAL 2 RCA Output 2.2 V RMS
BALANCED ( passive transformer's symmetrical ) 2 XLR Output : 2.2V RMS |
Output Impedance
|
100 ohm RCA - 600 ohm XLR
|
Load Impedance
|
10 kohm (min.) RCA - 600 ohm XLR
|
Frequency Response
|
20Hz to 22kHz +0.5dB/-0.5dB
|
Phase Response
|
Linear phase
|
THD + N
|
<0.1% 1KHz -20dB
|
Front Panel
|
Power, input selector, Phase Invert switch
|
Power Consumption
|
100-115V / 220-240V; 50 or 60Hz - 58VA
|
Dimensions
|
( W x D x H ) 450 x 370 x 100 mm
|
Weight
|
9 kg
|
Front finish
|
Satin Alu Silver or Satin Black
|
Case finish
|
Grey Nextel powder coated
|
Additional Information
USB DAC | No |
---|---|
USB-SPDIF | No |
XLR Output | No |
Compatible with i-pod, i-phone, i-pad | No |
File Formats Compatibility (sound) | No |
DAC chip | No |
Weight (Kg) | 9.0 |