Details
TECHNICAL SPECIFICATIONS
General
Unit (W x D x H) | 434 x 410 x 135mm 17.1 x 16.1 x 5.3in |
Cabinet Size (W x D x H) | 434 x 374 x 135mm 17.1 x 14.7 x 5.3in |
Net weight | 17.6kg 38.8lb |
Packaging Dimensions (W x D x H) | 548 x 520 x 249mm 21.6 x 20.5 x 9.8in |
Packaging gross weight | 20.4kg 45lb |
Carton Color | 2 Color |
Cushion / Packing | 4 Separate / Sheet |
Panel Color | SP / BK |
Front (Center) Panel | Aluminum |
Side cover | SECC with 4 straight emboss |
Side screw | SP: Nickel / BK: Black |
Rear Panel | SECC t1.0mm |
Chassis Material | SECC t1.2mm |
Bottom Layer | Single |
Volume Knob | Aluminum |
Input Selector | Aluminum |
Bass/Treble/Balance/ Phono Sel knobs | Aluminum |
Power button | Aluminum |
Other knob/button (LOUDNESS, SOURCE DIRECT etc) | Mold (Source Direct,Analog Mode,MM/MC) |
Foot | ABS resin with rigid rib w/Hot stamp (H : 20mm) |
Heatsink for Power Amplifier | Extruded Aluminum |
Specifications
Rated Output Power | 70W + 70W (8ohm,20Hz-20kHz,THD0.07%) 140W + 140W (4ohm, 1kHz, THD0.7%) |
Speaker Impedance | A or B : 4 ~ 16ohm A + B : 8 ~ 16ohm |
Frequency Response | 5Hz - 100kHz (0~ -3dB) |
Total Harmonic Distortion | 0.01 % (Rated output: –3 dB), 8 ohm/ohms, 1 kHz |
Dumping Factor | 100 and over |
Input Sensitivity: Phono input | MM: 2.5 mV / 47 kohm MC: 200 |
RIAA Deviation | 20 Hz - 20 kHz ±0.5 dB (MM/MC) |
Phono Maximum Input | MM : 130mV / 1kHz MC : 10mV / 1kHz |
Input Sensitivity: CD/LINE/RECORDER | 125 mV / 19 kohm |
Input Sensitivity: Power Amp input | 0.85V / 47kohm (EXT. PRE) |
Signal to Noise Ratio | PHONO (MM): (89dB) PHONO (MC): (74dB) CD: (107dB) |
Tone Control | BASS : 100Hz ±8dB TREBLE : 10kHz ±8dB |
Power Consumption | 295W |
at Standby | 0.2W TV autoplay off 0.4W TV autoplay on |
Audio Feature
Power Amplifier Circuit | New UHC-MOS Single Push Pull (7) |
Power Trans | Dual El Core |
Pre Amplifier Circuit | Variable Gain Preamplifier (OP AMP) |
Volume | Electric |
Additional Information
Does not appear in Skroutz | No |
---|