Original technologies prioritize sound quality To realize a smooth, stress free signal transmission LUXMAN use an original Beeline construction that features a non-angled wiring pattern to allow smooth signal transmission along the shortest optimal route. This is one of many examples of a LUXMAN original design that makes sound quality a priority. Rated output 100W + 100W (8Ω), 150W + 150W (4Ω) Input sensitivity/input impedance PHONO (MM): 2.5mV/47kΩ PHONO (MC): 0.3mV/100Ω LINE: 180mV/47kΩ BAL.LINE: 180mV/55kΩ MAIN-IN: 1V/47kΩ Output voltage REC OUT: 180mV, PRE-OUT: 1V Frequency response PHONO: 20Hz to 20kHz (within -3dB) LINE: 20Hz to 100kHz (within -3dB) Total harmonic distortion 0.009% or less (8Ω, 1kHz) 0.09% or less (8Ω, 20Hz to 20kHz) S/N ratio (IHF-A) PHONO (MM): 91dB or more PHONO (MC): 75dB or more LINE: 104dB or more Volume adjustment LECUA Amplification circuit ODNF 4.0 Output configuration Bipolar parallel push-pull Damping factor 210 Max. amount of tone control BASS: ±8dB at 100Hz TREBLE: ±8dB at 10kHz Power supply 230V~(50Hz) / 115V~(60Hz) Power consumption 270W 85W (under no signal), 0.4W (at standby) External dimensions 440(W) x 178(H) x 454(D) mm front side knob of 20mm and rear side terminal of 27mm included in depth Net weight 22.5kg (main unit) Accessories Remote control (RA-17A) Power cable Speaker terminal Supported Y-lug terminal dimension Width of part a: 15mm or less Width of part b: 8mm or more * Connection may not be performed depending on the shape of the Y-lug terminal.