With the C 368 Hybrid Digital DAC Amplifier, your home audio system will never fall behind the pack. Thanks to our MDC technology, the C 368 is easily customisable and ready for all future features and upgrades. With the optional BluOS® module, the C 368 can connect to your network and be controlled through a smartphone, tablet, or desktop, and connect wirelessly to any other BluOS Enabled device to create a multi-room High Resolution Audio system. You can also instantly connect to the C 368 through Bluetooth, giving you the ability to stream wirelessly from any Bluetooth Enabled device, and if you’re a vinyl fan, you can also add a turntable. Enjoying music has never been so easy. A totally modern approach to amplification, the C 368 is the ultimate amp for any music lover’s system. 

80W x 2 Continuous power into 8 or 4 Ohms

Bluetooth A2DP with aptX supported

MM Phono input

Analogue line inputs

SPDIF coax and optical inputs

Speaker A, Speaker B

Stereo or Bridge mode configuration

Preamp/Subwoofer out

Headphone amplifier

MDC Slots for future upgrades

IR Remote

Smartphone Control App

12V Trigger in/out

IR in/out

RS-232 Serial port for control

Control4, Crestron, RTI, URC, AMX, Savant, Elan certified

PREAMPLIFIER 

Line Input, Pre Out  

THD (20Hz-20kHz)<0.005% at 2V out

Signal/Noise Ratio>106dB (IHF; A-weighted, ref. 500mV out, unity gain)

Channel Separation>80dB (1kHz); >70dB (10kHz)

Input Impedance (R and C)22 kilohm + 100pF

Maximum Input Signal>4.5Vrms (ref. 0.1% THD)

Output Impedance Source Z + 240 Ohm

Input Sensitivity 93mV (ref. 500mV out, Volume maximum)

Frequency Response ±0.03dB (20Hz-20kHz) 

Maximum voltage output – IHF load>4.5V (ref. 0.1% THD)

Tone Controls Treble: ±7.0dB at 20kHz Bass: ±7.0dB at 60Hz 

Balance: -10dB 

Phono Input, Pre Out  

THD (20Hz-20kHz)<0.01% at 2V out 

Signal to Noise Ratio>84dB (200 Ohm source; A-weighted, ref. 500mV out) >76dB (MM cartridge source, IHF; A-weighted, ref. 500mV out)

Input Sensitivity1.44mV (ref. 500mV out, Volume maximum)

Frequency Response ±0.3dB (20Hz-20kHz)

Maximum Input Signal at 1kHz>80mVrms (ref. 0.1% THD) 

Line Input, Headphone Out  

THD (20Hz-20kHz) <0.005% at 1V outSignal/Noise Ratio>110dB (32 Ohm loads; A-weighted, ref. 2V out, unity gain)

Frequency Response ±0.3dB (20Hz-20kHz)

Channel Separation >60dB at 1kHz

Output Impedance 6 Ohms 

GENERAL SPECIFICATIONS 

Continuous Output Power into 4 Ohms and 8 Ohms (Stereo) >80W (ref. 20-20kHz at rated THD, both channels driven)

Continuous Output Power into 8 Ohms (Bridge Mode) 300W (at 20-20kHz at THD 0.03%)

THD (20Hz-20kHz) <0.03% (250mW to 80W, 8 Ohms and 4 Ohms)

Signal to Noise Ratio >98dB (A-weighted, 500mV input, ref. 1W out in 8 Ohms)

Clipping Power >95W (at 1kHz 0.1% THD)

Clipping Power (Bridge Mode) >315W (at 1kHz 0.1% THD)

IHF Dynamic Power 8 Ohms 120W 4 Ohms 200W 2 Ohms 250WIHF 

Dynamic Power (Bridge Mode) 8 Ohms 500W 4 Ohms 560W 

Peak Output Current >20A (in 1 Ohm, 1ms) 

Damping Factor >300 (ref. 8 Ohms, 20Hz and 6.5kHz)

Frequency Response ±0.3dB (20Hz-20kHz)

Channel Separation >75dB (1kHz) >70dB (10kHz)

Input Sensitivity (for 80W in 8 Ohms) 

Line In: 470mV; Digital In: 21% 

FSSample Rateup to 24 bit/192kHz

Frequency Band2.402G-2.480G

Maximum Transmit Power (dBm) 7dBm ±2dBm 

POWER CONSUMPTION at Auto Standby ON and Network Standby OFF0.5 Watts*at Auto Standby ON and Network Standby ON1.2 Watts**OFF mode (Power switched OFF)0.1 Watts    * – After 20 minutes of no user interface interaction and no active source input ** – With established wireless Bluetooth connectivity and 20 minutes of no user interface interaction and no active source input  

NOTE: Bluetooth connectivity is always live when configured 

WEIGHT & DIMENSIONS 

Gross Dimensions - include feet, extended buttons and rear panel terminals

 (W x H x D): 435 x 100 x 390mm (17 1/8 x 3 15/16 x 15 3/8)

Net Weight7 .8kg (17.2lb)

Shipping Weight 10.1kg (22.3lb)