TECHNICAL SPECIFICATIONS Measurement conditions: 22 °C, 230 V mains voltage, Audio Precision AP2722Mains connection: 90 – 240 V, 50 – 60 HzPower consumption: 0.2 W stand-by, 8 W operation, 18 W max.Dimensions (W x H x D): 280 x 220 x 63 mm (11 x 8.7 x 2.5 in.)Weight: 2.6 kg (5.73 lbs)Network playerEthernet: 100 Mbit/sWLAN: Dual-band 802.11a/b/g/n/ac, WPS supportBluetooth: 4.2, A2DP USB: High-speed host interface for harddisks, USB sticks, DVD ROM drives, max. output current 1.5 ASupported codecs: WAV, FLAC, AIFF, ALAC, MP3, AAC, Ogg Vorbis, WMA, DSD UPnP and DLNA support PCM resolution:44.1 kHz up to 384 kHz, 24bit (WLAN up to 192 kHz)DSD resolution: DSD 64 up to DSD 256 (WLAN up to DSD 128)Gapless playback Streaming services: TIDAL, Qobuz, Deezer, HighResAudio, SpotifyInternet radio and podcastRoon ReadyD/A converter Resolution: 768 kHz/32 bit and DSD 512Dynamic range: >125 dBTHD & Noise: <0.001 % (@ 0 dB FS)Master-Clock: Ultra low jitter MEMS Femto Clock Re-Sampling: with 180 dB dynamics and 32 bit resolution, bit-perfect or DSDRe-sampling jitter damping: >60 dBConverter architecture: two AK4493 DACs in dual differential mono mode, AK4137 re-samplerOutput voltage: 2.5 V @ 0 dBFS RCA, 5 V @ 0 dBFS XLR Analog preamp Inputs: three analog line inputs with 20 kOhms of input impe–dance. Max. input voltage 3.5 V unbalanced. Optional MM input for connecting a turntable (replaces input 1). Connection values MM: 47 kOhms / 150 pF.Outputs: one balanced and one unbalanced output. The outputs may be used independently. Output impedance: RCA: 100 ohms, XLR: 20 ohms. Max. output voltage: 2.5 V unbalanced, 5 V balanced Volume level control range: 0 to 99 with the following charakteristic: 0 to 20 in 2 dB steps, 21 to 60 in 1 dB steps, 61 to 99 in 0.5 dB steps.Balance control: + / – 6 dB in 1 dB stepsFrequency response: 2 – 200 kHz (-3 dB)Gain: 0 dB / 6 dB / 12 dB switchableTHD & Noise: < 0.001 % @ 2.5 V output Headphone connector: 6.35 mm (1/4“) jack socket Headphone gain: 0 dB / 12 dB switchable Recommended headphone impedance: 16 – 200 ohms Damping factor of headphone output: >100