Inspired by the Amplifier that Inspired a Generation

There’s no denying the historic significance of the 1969 Woodstock Music and Art Fair. There had never been anything like it, and many would argue there’s
not been anything like it since. With an unexpected crowd of over 400,000 people, there was a lot that could have gone wrong – and some things did. But
one aspect that’s nearly universally agreed upon was how great all the musicians sounded. That sound quality is thanks to the McIntosh MC3500 Vacuum
Tube Amplifiers that exclusively powered the sound system used at Woodstock.1
It was at a 2019 event to celebrate the 50th Anniversary of Woodstock where McIntosh President Charlie Randall, realizing the historical importance of the MC3500,
first dreamed of bringing it back into production. That proved no easy task considering it was first designed over 50 years ago. But after more than two years of
development, that dream has become reality as McIntosh is proud to announce the MC3500 Vacuum Tube Amplifier Mk II

■ The MC3500 Vacuum Tube Amplifier Mk II is a conservatively rated
350 Watt monoblock that takes its inspiration from the original 1968-71
MC3500, and incorporates everything we have learned about vacuum tube
amplifier design since the 1960s.

■ Upgraded to modern standards and with modern components to deliver
an audio performance worthy of its predecessor and the legacy of their
shared model number.

■ Uses our Unity Coupled Circuit output transformer, which allows the full
350 Watts to be safely delivered to virtually any speaker regardless if it has
2, 4 or 8-Ohm impedance.

■ Output powered by eight EL509S high-power output vacuum tubes,
which was chosen specifically due to it having many similar qualities and
characteristics of the 6LQ6 “sweep tubes” used on the original MC3500.

■ Like the original MC3500, the MC3500 Mk II has a fully balanced driver
section that utilizes three 12AX7A and one 12AT7 vacuum tubes.

■ Power Guard Screen Grid Sensor™ (SGS) helps prevent premature vacuum
tube failure by monitoring the screen grid current in the output tubes. If the
current becomes too high, Power Guard SGS dynamically attenuates the
input signal in real time to keep the vacuum tubes operating at safe levels.

■ Sentry Monitor™ observes the output current and shuts the amplifier off if
it ever exceeds safe limits.

■ Uses a variation of our DualView™ Power Output Meter design, with the
top scale showing the power output in both Watts and decibels, while the
bottom scale shows the amplifier warmup time.

■ Front panel is machined aluminum with a bead blast finish and gold
anodizing that emulates the look and finish of the original MC3500. A clear
glass insert covers the meter; a black glass insert at the bottom houses the
knobs and illuminated lettering.

SPECIFICATIONS

Power Output: 350 Watts into 2, 4 or 8 Ohms

Rated Power Band: 20Hz to 20kHz

Dynamic Headroom: 2.4dB

Damping Factor: >25

Frequency Response: +0, -0.5dB from 20Hz to 20kHz

+0, -3dB from 10Hz to 70kHz

Total Harmonic Distortion: 0.3% maximum at any power

level from 250 milliwatts to  rated power, 20Hz to 20kHz

Signal to Noise Ratio: 120dB below rated output

Input Sensitivity: 3.8 Volts Balanced / 1.9 Volts Unbalanced

Voltage Gain: 2 Ohms: 23db / 4 Ohms: 26db / 8 Ohms: 29db

Input Impedance: 22k Ohms (Balanced/Unbalanced)

Overall Dimensions (W x H x D): 18” (45.7cm) x 11-13/16” (30cm)

x 22-5/8” (57.5cm)

Weight: 121 lbs (54.9kg) net / 147 lbs (66.7 kg) in shipping carton

For the Consumer’s Protection:

In order to ensure the highest level of customer satisfaction, new McIntosh

products may only be purchased from an Authorized McIntosh Dealer; and, with certain

limited exceptions may only be purchased

over-the-counter or delivered and installed by

the Authorized McIntosh Dealer. McIntosh

does not warrant, in any way, products that

are purchased from anyone who is not an

Authorized McIntosh Dealer, or that have had

their serial numbers altered or defaced.