Λεπτομέρειες
M1 Specifications
Power Output continuous, 20 Hz to 20 kHz, <0.1% THD+N | |
8 Ω | 1000 W |
4 Ω | 2000 W |
3 Ω | 2400 W |
2 Ω | >2000 W depending on line voltage regulation |
With 120V AC supply the amplifier’s maximum output into impedances 4 Ω and lower, as well as its maximum duration, vary depending on line voltage regulation. | |
Frequency Response 20 Hz to 20 kHz | |
Open circuit | +/- 0.1 dB |
8 Ω | +/- 0.1 dB |
4 Ω | +/- 0.1 dB |
2 Ω | +/- 0.2 dB |
Power Bandwidth 1000 W at 8 Ω | 5 Hz to 45 kHz |
THD+N at 1 kHz, 8 Ω | |
1 W | 0.01 % |
10 W | 0.01 % |
100 W | <0.03 % |
1000 W | <0.06 % |
IMD 19 kHz + 20 kHz, CCIF | 0.003% |
S/N Ratio ref. 1000 W, IEC-A | 113 dB |
Voltage Gain | 29 dB |
Input Sensitivity | 100 mV for 1 W output, 3.2 V for 1000 W output (8 Ω) |
Input Impedance | 10 kΩ (RCA), 20 kΩ (XLR) |
Damping Factor | 800 to 1400 depending on frequency |
XLR Configuration | Pin 1: Ground, Pin 2: Positive, Pin 3: Negative |
POWER REQUIREMENTS | |
Consumption in a typical music/theater installation | |
standby mode, 120V mains | <1 W |
standby mode, 240V mains | <2 W |
operate mode, idle | 33 W |
typical operation | 300 W |
Where mains voltage is 120V, one dedicated 15A circuit per amplifier is recommended depending on speaker. A 20A circuit is adequate for two amplifiers playing music where speaker impedance is 8 Ω. This product operates from a single phase AC power source that supplies between 108V and 264V at a frequency of 50 or 60 Hz. | |
DIMENSIONS | |
Height with feet | 2 1/4 inches (5.7 cm) |
Height without feet | 1 rack unit |
Width standard handles | 19 1/4 inches (49 cm) |
Width rackmount handles | 19 inches (48.3 cm) |
Depth | 18 3/4 inches (47.6 cm) |
Weight (unpacked) | 20 lb (9 kg) |
Πληροφορίες
Δεν Φαίνεται στο ΣκρουτζΦαίνεται στο Σκρουτζ | Όχι |
---|---|
Βάρος (Kg) | 9.0 |